How-To Guide: three Ways To Boot Ubuntu Linux From a USB Flash Drive

0
211

Option 1: Boot Ubuntu as a Live CD from a USB Flash Drive

Use this option to put in Ubuntu as a Live Install, which allows you to boot from the USB flash force in Ubuntu and enjoy the Linux surroundings; however, it will not retain any adjustments or settings after you close up down. This is an extraordinary way to get a sense of the OS and check a number of its competencies and traditional hardware compatibility.

Do Savor

ubuntu

  • Programs you could want to download:
  • Ubuntu 10.04 Live CD ISO available at ubuntu.Com
  • Universal USB Installer available at pendrivelinux.Com
  • What you will need:
  • Running Windows XP/Vista/7
  • Fat32 Formatted USB 2.Zero Flash Drive, at least 1GB
  • PC with a Bios which could boot from USB
  • With all the necessary components in the vicinity, we can begin to set up our Ubuntu Live USB Drive.
  • 1. Run the Universal USB Installer by way of Pendrivelinux.Com that you downloaded earlier.
  • 2. Choose Ubuntu 9.10/10.04.1 Desktop i386
  • 3. Select the Ubuntu Live CD that you downloaded earlier
  • 4. Choose your Flash Drive
  • 5. In this instance, we are going to leave the patience option unchecked.

This can take everywhere from 15 minutes to half-hour depending on the speed of your gadget. At one factor, the progress bar will freeze until it’s far performed, and that is the lengthiest wait of the manner. Once whole, you may reboot your laptop with the USB flash power inside the USB port, press F12 for the Boot Menu, and pick out the detachable media as well from and you are in. As a Live USB, any adjustments you’re making to the Ubuntu surroundings will no longer persist through a reboot. This is due to the fact strolling on this mode, Ubuntu uses to be had RAM in place of the Swap and Hard Disk area. This option also contains the installation files had to install Ubuntu without delay for your computing device in case you should so desire.

Option 2: Boot Ubuntu as a Live CD with Persistence from a USB Flash Drive

This option will include installing Ubuntu Linux onto your flash pressure with an area for the persistent garage. You might be able to restart the PC, boot lower back into the Linux environment, and all settings or changes made formerly will persist.

NOTE: This option is tough on Flash Memory, as there may be pretty a bit of analyzing and writing to the Flash Memory.

  • What you will want:
  • Running Windows XP/Vista/7
  • Fat32 Formatted USB 2.0 Flash Drive, at the least 2GB
  • PC with a Bios which could boot from USB
  • With all of the necessary additives in the region, we can start to set up our Ubuntu Live USB Drive.
  • 1. Run the Universal USB Installer by Pendrivelinux.Com, which you downloaded earlier.
  • 2. Choose Ubuntu nine.10/10.04.1 Desktop i386
  • 3. Select the Ubuntu Live CD which you downloaded in advance
  • 4. Choose your Flash Drive
  • 5. Select the Persistence Option of 1GB Casper-RW

This can take everywhere from 15 mins to 30 minutes, depending on the speed of your system. At one point, the progress bar will freeze till it’s far finished, and that is the lengthiest wait of the system. Once entire, you may reboot your computer with the USB flash drive within the USB port, press F12 for the Boot Menu, and pick the detachable media to boot from, and you are in. As a Live USB with Persistence, any adjustments you make to the Ubuntu environment will maintain a reboot. This choice also includes the install documents needed to set up Ubuntu without delay on your computing device in case you need to so preference.

Option three: Install Ubuntu immediately to a USB flash drive

This alternative works via installing Ubuntu to the flash force as an entire installation. It does no longer maintain the setup files to put in on some other device. This will help you use Ubuntu precisely as though it had been set up on my own at the tough disk. You can boot from it with any laptop that could boot from a USB flash drive.

Note: This technique requires which you disable your difficult drive in BIOS to save you from overwriting your contemporary running machine and force the set up onto the USB pressure.

  • What you may want:
  • USB 2.Zero Flash Drive, at least 4GB
  • PC with a BIOS that could boot from USB
  • Blank CD
  • A Computer with the ability to Burn CD/DVD
  • Now with all the vital additives in the vicinity, we can start the technique.

1. First, you’ll need to burn your Ubuntu ISO to CD the usage of software like ImgBurn available at ImgBurn.Com

Boot your laptop and press F2 to go into the system BIOS. Within here, you may want to disable your Hard Drive. If this is not a choice for your BIOS, I could advise shutting down your pc and unplugging the electricity and information cables from your difficult drive before intending. NOTE: If you pick out no longer to disable your tough power, you run the hazard of putting in Ubuntu on top of your modern OS and can lose precious facts.

3. After you have disabled your difficult pressure, an area the Ubuntu Live CD into your PC and boot from this.

4. At the preliminary boot display, select to attempt Ubuntu, no longer installation.

boot

5. Once Ubuntu loads plug in the favored flash power into the computer.

6. Now, double click on the Install Ubuntu icon that looks at the laptop.

7. The first 3 monitors are language, time zone, and keyboard layout.

8. Now Ubuntu will notify you that there’s a disk established and asks to unmount it. This is your flash force. Permit it to unmount.

9. This is the prepared disk space display. I chose to depart mine at default and allow the installer to take care of the walls needed with the aid of Linux.

10. Now, you’ll see the login and person statistics display.

11. Now you are geared up to install, click installation.

12. At one factor for the setup’s duration, you can note a bypass button seems on the bottom left. This is to skip the car update, and sooner or later, the language packs. I selected to skip language packs replace.

13. This might also take some time, mine took about 35 mins to complete. When it’s far accomplished, eject the disk and close down the pc. Plug your hard power back in if vital, or boot your computer into bios and re-enable it. Reboot your computer and press F12 to enter the boot menu, pick out the flash pressure, and boot into Ubuntu.